SCAN P46

Introducing SCAN P46 – Industrial Physics

SCAN P46 is a testing standard that was developed to determine the compressive strength of paper and board using the short span compression (SCT) test. 

Short-span compression testing (SCT) is a modern and cost-effective method of testing for corrugated paper testing research and development. As a method of corrugated paper testing, we’ve seen it increase in popularity in recent years. Now it’s taking over from some of the more traditional paper and corrugated paper crush tests and techniques such as the ring crush test or the linear crush test. 

While compression testing is helpful for testing all sorts of materials, from concrete to ceramics, SCT testing is most commonly used to test paper, board, and corrugated materials like cardboard.

What’s involved in short span compression testing?  

In SCT, a single piece of liner board or similar medium is inserted into pneumatic clamps that are precisely aligned to produce a sample-free length of only 0.70mm. The sample is then axially compressed until it reaches the point of failure, allowing you to measure how long the process takes. 

What are the benefits of SCT?  

So, what are the benefits of SCT over the other types of corrugated paper testing?  

• The efficient design means that there’s a shortened preparation time for each sample  

• The precisely calibrated clamps allow for extremely accurate measurement 

• The SCT offers excellent buckling stability and insight into the load-bearing fiber portion of the paper or board. 

SCAN P46 compression testing devices  

So, how can Industrial Physics improve your SCAN P46 compression testing? 

Short Span Compression Test (SCT, STFI): 500N 17-36 

Developed by TMI Büchel, our paper testing specialist brand, the 17-36 Short Span Compression Tester incorporates a friction-quashing precision mechanical design for unmatched accuracy and repeatability. 

Need compression testing solutions? Get in touch  

We’ve learnt a thing or two about paper and board testing over the decades. Now Industrial Physics is recognized as a brand that likes to bring new, innovative compression testers to market. 

We like to share our knowledge and we’re here to help you to answer your questions about compression testing. Across the knowledgebase section of our website we publish lots of blogs on related subjects.   

First up, why not try this blog that explores the merits of short-span compression testing. Then you could download our whitepaper on physical testing application information of paper and board. 

If you have any questions about SCAN P46 compression testing and how we can help you with other aspects of your paper and board testing, then just get in touch! 

If you have any further questions, then don’t hesitate to get in touch!  

Your global test and measurement partner for SCAN P46