Products

Set of ferrous and non-ferrous zero plates for accurate calibration of DeFelsko coating thickness probes. Enables reliable measurement across a wide range of materials.

High-quality glass plate (100x100x6mm) for use with the TQC Sheen Pendulum Hardness Tester. Ensures a level, stable surface for accurate and repeatable hardness measurements on coatings.

TQC Sheen Ideal Finish Analysis software is designed to download CurveX oven logger and DewCheck logger data to a computer, analyze the curing and environmental data and print reports. The TQC Sheen Ideal Finish Analysis software is free of charge. Access the latest Ideal Finish Analysis Software here Download now!

The TQC Sheen Infrared Thermometer Professional is an advanced, non-contact temperature measurement tool that provides highly accurate readings in demanding industrial environments. With a long-range distance-to-spot ratio of 50:1 and an adjustable emissivity feature, this thermometer ensures precise temperature monitoring, even from a distance.

An easy-to-use and compact infrared thermometer that measures surface temperatures in challenging industrial environments. With a range of -30°C to 270°C, this pocket-sized tool is ideal for hard-to-reach areas, moving objects, and electrical components.

Our new TQC Knock-out test panels are designed to minimize the build-up of paint on the panel edges because of the knock-out frames. Because of the 4 mm holes in the knock-out frames it is easy to hang the panels horizontally or vertically without leaving any marks. All our knock-out panels are provided with a…

Lighted Microscope 25x (3 x LED) Portable surface microscope with 25x magnification. The 7.2 mm wide field of view is illuminated with 3 LED's that can be dimmed or switched off. The focus of the glass optics can be adjusted. All this makes the portable surface microscope ideal to investigate coating defects right on the…

Liquid container kit (with / without plug), 5+5 pcs

Introducing the TQC Sheen Magnetic Thermometer, designed for conveniently quick and accurate surface temperature measurements.

Metal sheet and coil coating cure profiler.

Ensure precise and reproducible paint drying time measurements with TQC Sheen Narrow Glass Beds. Available in two sizes, these high-quality glass plates are designed for use with the TQC Sheen Drying Time Recorder.

Non-ferrous zero plate designed for verifying and calibrating DeFelsko coating thickness probes. Ensures accurate baseline readings on non-magnetic substrates.

Double-track open frame designed for use with the TQC Sheen Washability Tester (WBT) and two half-width test beds. Ideal for secure sample placement in dual washability test setups.

Half-width single-track sample clamp frame for use with the TQC Sheen Washability Tester. Designed for secure and repeatable testing with one narrow tool holder on a half-size test bed.

A sturdy, spare plastic box designed for storing test panels.

PowderTAG uses ultraviolet techniques to measure the thickness of powder coatings in precured and cured status. Precise, reproducible and non-destructive.

The PTK Pretreatment Test Kit brings the key surface-preparation checks into one portable case for coatings inspectors working on steel prior to painting. It covers soluble salt (Bresle), dust, surface profile and cleanliness assessment, so contamination and profile faults are caught before coating is applied. Available as the Basic Kit or the Full Kit, with optional items that fit the pre-cut foam lining.

Pump tubing (PTFE) suitable for most liquids, 5 pcs

Pump tubing (sillicone) suitable for most Diiodomethane, 2 pcs

Refurbish-kit for older series cupping test SP4200 (Indenter+tool) Depending on the frequency of use and sample material the indenter of a cupping test may wear over time. A worn indenter may lead to incorrect test results. In order to bring back the cupping test in original condition a refurbish-kit is available which allows easy and…

TQC set of 14 Mandrels, width 100mm, for TQC Bend Test 100 mm. A set of 14 mandrels with a diameter of 2, 3, 4, 5, 6, 8, 10, 12, 13, 16, 19, 20, 25 and 32 mm. Incl. Desktop holder (can also be wall mounted) The TQC Bend Test Cylindrical Mandrels consists of 14…

TQC set of 7 Mandrels, width 100mm, for TQC Bend Test 100 mm Imperial (SP1822) A set of 7 mandrels with a diameter of 1/8", 1/4," 3/8", 1/2", 5/8", 3/4", 1" Incl. Desktop holder (can also be wall mounted) The TQC Bend Test Cylindrical Mandrels consists of 7 mandrels (Imperial) for the TQC Bend Test…

The Shore Hardness Gauge Test Stand is designed for Shore A, C, and D* type Durometers, ensuring precise and reproducible hardness tests on rubber or plastics.

The TQC Sheen Shore Hardness Test Block Kit provides reliable reference blocks for checking durometer accuracy. Available for Durometer A and D, these kits include multiple hardness values with certified calibration, ensuring your durometers operate within tolerance for consistent and repeatable hardness testing.