Products

An easy-to-use and compact infrared thermometer that measures surface temperatures in challenging industrial environments. With a range of -30°C to 270°C, this pocket-sized tool is ideal for hard-to-reach areas, moving objects, and electrical components.

Our new TQC Knock-out test panels are designed to minimize the build-up of paint on the panel edges because of the knock-out frames. Because of the 4 mm holes in the knock-out frames it is easy to hang the panels horizontally or vertically without leaving any marks. All our knock-out panels are provided with a…

Comparators for determining surface roughness by touch and sight. Conforms to ASTM D4417. The KTA standard has 5 different grades of roughness and is available in three different versions. Available in Imperial units only. KTA keane-tator surface profile comparator model KTA-standard for GRIT and SHOT Keane tator surface profile comparator The Keane Tator Surface Profile…

Lighted Microscope 25x (3 x LED) Portable surface microscope with 25x magnification. The 7.2 mm wide field of view is illuminated with 3 LED's that can be dimmed or switched off. The focus of the glass optics can be adjusted. All this makes the portable surface microscope ideal to investigate coating defects right on the…

From washability testing to film application, the TQC Sheen LinQ can be used to automate your inks and coatings testing across a range of applications! 

Liquid container kit (with / without plug), 5+5 pcs

Introducing the TQC Sheen Magnetic Thermometer, designed for conveniently quick and accurate surface temperature measurements.

Metal sheet and coil coating cure profiler.

Precision metal shims designed to meet ASTM D2486 requirements. Supplied as a set of four, these small-format spacers enable accurate setup and alignment for repeatable abrasion and washability tests.

Ensure precise and reproducible paint drying time measurements with TQC Sheen Narrow Glass Beds. Available in two sizes, these high-quality glass plates are designed for use with the TQC Sheen Drying Time Recorder.

Non-ferrous zero plate designed for verifying and calibrating DeFelsko coating thickness probes. Ensures accurate baseline readings on non-magnetic substrates.

Complete nylon brush tool (454g / 16.01oz) for use with the TQC Sheen Scrub Abrasion and Washability Tester. Includes stainless steel holder, brush, and weights. Conforms to ASTM D2486.

Double-track open frame designed for use with the TQC Sheen Washability Tester (WBT) and two half-width test beds. Ideal for secure sample placement in dual washability test setups.

Half-width single-track sample clamp frame for use with the TQC Sheen Washability Tester. Designed for secure and repeatable testing with one narrow tool holder on a half-size test bed.

A sturdy, spare plastic box designed for storing test panels.

A set of 25 plastic cups designed for use with the TQC Sheen Bresle Test Kit, ensuring accurate surface chloride testing.

PowderTAG uses ultraviolet techniques to measure the thickness of powder coatings in precured and cured status. Precise, reproducible and non-destructive.

The PTK Pretreatment Test Kit brings the key surface-preparation checks into one portable case for coatings inspectors working on steel prior to painting. It covers soluble salt (Bresle), dust, surface profile and cleanliness assessment, so contamination and profile faults are caught before coating is applied. Available as the Basic Kit or the Full Kit, with optional items that fit the pre-cut foam lining.

A wide range of high-performance probes designed for use with the PosiTector 6000 coating thickness gauge. Suitable for both ferrous and non-ferrous substrates, including specialized probes for duplex coatings and extreme conditions.

Pump tubing (PTFE) suitable for most liquids, 5 pcs

Pump tubing (sillicone) suitable for most Diiodomethane, 2 pcs

Refurbish-kit for older series cupping test SP4200 (Indenter+tool) Depending on the frequency of use and sample material the indenter of a cupping test may wear over time. A worn indenter may lead to incorrect test results. In order to bring back the cupping test in original condition a refurbish-kit is available which allows easy and…

TQC set of 14 Mandrels, width 100mm, for TQC Bend Test 100 mm. A set of 14 mandrels with a diameter of 2, 3, 4, 5, 6, 8, 10, 12, 13, 16, 19, 20, 25 and 32 mm. Incl. Desktop holder (can also be wall mounted) The TQC Bend Test Cylindrical Mandrels consists of 14…

Set of 2 ASTM D2486-compliant glass plates designed for use with the TQC Sheen Washability Tester (WBT). Provides a smooth, standardized surface for repeatable abrasion and washability testing of coatings, inks, and surface finishes.