Products

PowderTAG uses ultraviolet techniques to measure the thickness of powder coatings in precured and cured status. Precise, reproducible and non-destructive.

The PTK Pretreatment Test Kit brings the key surface-preparation checks into one portable case for coatings inspectors working on steel prior to painting. It covers soluble salt (Bresle), dust, surface profile and cleanliness assessment, so contamination and profile faults are caught before coating is applied. Available as the Basic Kit or the Full Kit, with optional items that fit the pre-cut foam lining.

Pump tubing (PTFE) suitable for most liquids, 5 pcs

Pump tubing (sillicone) suitable for most Diiodomethane, 2 pcs

Refurbish-kit for older series cupping test SP4200 (Indenter+tool) Depending on the frequency of use and sample material the indenter of a cupping test may wear over time. A worn indenter may lead to incorrect test results. In order to bring back the cupping test in original condition a refurbish-kit is available which allows easy and…

The Shore Hardness Gauge Test Stand is designed for Shore A, C, and D* type Durometers, ensuring precise and reproducible hardness tests on rubber or plastics.

The TQC Sheen Shore Hardness Test Block Kit provides reliable reference blocks for checking durometer accuracy. Available for Durometer A and D, these kits include multiple hardness values with certified calibration, ensuring your durometers operate within tolerance for consistent and repeatable hardness testing.

Our TQC Sheen Sling Psychrometer accurately determines percentage relative humidity without the need to consult complex tables.

Test cabinets for the accelerated testing of products such as coatings, plastics, packaging etc. on wear and tear caused by light and/or temperature. A powerful Xenon light source produces radiation on different wavelengths and, if required, at increased temperatures. The flexible microprocessor-based control enables automatic test cycles.

Spare gloss cradle for TQC Sheen Glossmeter – SoloGloss & PolyGloss. Is discontinued and cannot be quoted, the Glossmeter must be sent to our factory, as the new cradle needs to be paired with the device.

A replacement set of 12 precision needles for use with the TQC Sheen Drying Time Recorder. Ideal for maintaining testing accuracy during drying time evaluations.

Set of 8 replacement needles for the TQC Sheen Drying Time Recorder, designed to ensure accurate and consistent testing of coating drying times.

A roughness tip designed to work with the TQC Sheen Surface Roughness Gauge or the combined Surface Roughness and Coating Thickness Gauge. Can be ordered as a spare or replacement.

High-quality replacement thermometer for the TQC Sheen Sling Psychrometer to ensure precise temperature readings.

A complete set of 12 replacement 5g weights for the TQC Sheen Drying Time Recorder. Ensures uniform pressure for consistent and reliable drying time tests.

Set of 6 replacement weights for use with the TQC Sheen Drying Time Recorder, ensuring precise and consistent coating test results.

A 1-meter replacement wick for the TQC Sheen Sling Psychrometer to support accurate and efficient performance in humiidty measurements.

SSPC-VIS 1 PICTORIAL SURFACE STANDARD DRY BLAST CLEANING Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning. SSPC's most widely used visual reference features over 50 full-color photos of previously coated and uncoated, rusted steel surfaces before and after dry abrasive blast cleaning. Similar to the Swedish and British standards, but…

Steel cannulus tip 0.5 mm (min order quantity 10 pcs)

The TQC Sheen Surface Roughness & Coating Thickness Gauge is a robust and versatile device that has two measurement capabilities in one: coating thickness or surface roughness. 

The TQC Sheen Surface Roughness Gauge is a straightforward instrument for extremely fast and precise measurements of the roughness and peak-to-valley height of a surface.

Surface roughness meter Mitutoyo SJ210 with SJ-tools Data analysis software Surface Roughness Tester SJ-210 offers a choice of 39 roughness parameters (according to DIN EN ISO, VDA, JIS, ANSI, MOTIF and freely selectable variables) and a probe geometry according to DIN EN ISO 3274: 2 ìm / 60 ° (recommended). The device has an incredibly…

The TQC Sheen Syringe and Needle is a critical spare part for conducting Bresle tests in accordance with ISO 8502-6, the international standard for determining surface chloride contamination. This set is used to accurately extract, inject, and circulate deionised water through the Bresle patch during the surface sampling and measurement process. The syringe enables precise…

Genuine Taber CS 17 Green abrasion wheels, engineered for use with TABER Abraser 1700-1750. Designed to deliver standardized rub-wear testing with repeatable results across a wide range of rigid materials including coatings, metals, aluminum, and rubber.