Products

The Enhanced Lab System provides non-contact, non-destructive and real-time thickness measurements for offline and in-line coating testing. 

The United Testing DFM Series is a floor-model universal testing machine available in 100, 150, 300 and 600 kN force capacities - built for tensile, compression, flex and advanced materials testing across aerospace, automotive, construction and R&D applications, with DragonFly UTS software included as standard.

With unsurpassed accuracy, reliability, and flexibility under the most demanding on-line operating conditions, the EC900 process oxygen analyzer is a breath of fresh air. 

The SpecMetrix® Film Weight Station provides non-contact, non-destructive and real-time film weight and coating thickness measurement data for laboratories. 

The SpecMetrix® DFTQA System provides non-contact, non-destructive and real-time thickness measurements for primers and top coat dry film thickness coatings. 

The Advanced Lab System provides laboratories with non-contact, non-destructive and real-time coating thickness measurements for applied coatings and coated layers on samples.

The United Testing Tru-Blue II is a bench-top Rockwell hardness tester in 10, 14, 18 and 20 inch vertical test heights - certified to ASTM E18 and ISO 6508, in service at NADCAP-approved heat treatment, fastener and aerospace component manufacturing facilities.

Reliable leak, flow and vacuum decay testing in one integrated process control tool. This easy-to-use testing solution offers repeatable and quantitative results, perfect for a wide range of QA processes.  

Efficient and reliable leak and flow tester, perfect for checking the integrity of everything from flexible packaging to electronical products.  

The United Testing LCH Speedy Tester is a straightforward tensile and compression testing machine with 5 interchangeable load cell capacities (15, 25, 50, 100, 150 kN) - built for destructive testing of spot welds, adhesive bonds, fasteners and chain without the complexity of a PC-driven UTM.

Invest in a powerful ZR800 Series Oxygen Analyzer and you’ll measure the oxygen in most industrial gas streams from 0.1ppm up to 100% volumes.

Portable and precise gloss meters, ideal for production and laboratories inspecting paint, coatings, plastics and automotive parts.

When you need to measure the tacking strength of a range of adhesive materials, you'd be hard pressed to beat the Model HTC-1 tackiness checker.

Accurately measure the apparent bulk density of powders, granules, and other divided solids using Ray-Ran's Apparent Bulk Density Apparatus. Each model is designed to meet the specific requirements of ASTM D1895 (Methods A, B or C) or ISO R60.

The Torus Easi-Check Artefact is a valuable instrument that enables users to perform interim verification checks on their CMM at periodic intervals.

When you need to cut accurate samples from plastic, rubber, fabrics, boards, laminates or paper, the RR-HCP hand operated cutting press won't let you down. 

The TQC Sheen Grindometers are precision instruments used to determine the particle size and fineness of many materials, such as paints, lacquers, pigments, fillers, and food.

The Ray-Ran Pioneer Weighing Balances are highly accurate and easy to use. Our precision scales are relied upon to weigh all different types of materials, across most industries, to international standards.

Determine the thickness of a variety of paints and coatings on ferrous and non-ferrous materials, with this robust and straightforward digital coating thickness gauge.

The United Testing DSTM Series is a table-top universal testing machine available in 5, 10, 20 and 25 kN capacities - built for plastics, films, rubber, textiles, adhesives and small-fastener testing with DragonFly UTS software included as standard.

Our TQC Sheen Adhesion Test Tape (ISO 2409:1999) is fiber reinforced and helps you to meet the requirements of international testing standards.

The TQC Sheen Digital Stopwatch is an accurate and reliable stopwatch, with a clear display, large digits, split times and a resolution to 1/100th of a second.

The Can Holder accessory is a useful tool to allow users be able to hold a wide-range of cans or cylindrical samples with their Scrub Abrasion and Washability tester. Ideally combined with the MEK Tester, so users can carry out solvent and chemical resistance of their can’s coatings.

Fully compatible with our Scrub Abrasion & Washability Tester, the MEK Tester Pro Accessory allows users in R&D, quality control and product development to evaluate the chemical resistance, durability and performance of their coatings.