Products

The TQC Sheen Camera Tool is created for the TQC Sheen Scrub, Abrasion and Washability tester (AB6000 & AB6010). As washability tests are time consuming, we created a camera tool and software to save operator time.

Cloth Holder Tool

A high-precision, non-destructive testing tool for measuring concrete compressive strength, designed for reliable, on-site quality control and built to withstand rigorous use in the field.

Our Cylindrical Bend Test is designed to measure the elasticity, elongation and adhesion of a paint film at bending stress on metal panels. Our easy-to-use bend test equipment offers straightforward and reliable mandrel testing. 

High-quality glass plate (100x100x6mm) for use with the TQC Sheen Pendulum Hardness Tester. Ensures a level, stable surface for accurate and repeatable hardness measurements on coatings.

The TQC Sheen Hardness Pen is a perfect tool for testing the hardness, wear, or scratch resistance of materials on flat or curved surfaces.

Our new TQC Knock-out test panels are designed to minimize the build-up of paint on the panel edges because of the knock-out frames. Because of the 4 mm holes in the knock-out frames it is easy to hang the panels horizontally or vertically without leaving any marks. All our knock-out panels are provided with a…

Precision metal shims designed to meet ASTM D2486 requirements. Supplied as a set of four, these small-format spacers enable accurate setup and alignment for repeatable abrasion and washability tests.

Complete nylon brush tool (454g / 16.01oz) for use with the TQC Sheen Scrub Abrasion and Washability Tester. Includes stainless steel holder, brush, and weights. Conforms to ASTM D2486.

A handy pencil sharpener that is designed to be used for the hardness test with Wolff Wilborn pencils. Can be ordered as a spare or replacement.

About the Qualicoat kit To determine whether or not a coating meets a customer's requirements, the results need to be measurable against technical specifications. On behalf of customers who have products coated, Qualicoat defines comprehensive quality requirements and monitors their compliance by licensed plants worldwide. As a result, purchasers of coated aluminum receive a premium-grade…

Set of 2 ASTM D2486-compliant glass plates designed for use with the TQC Sheen Washability Tester (WBT). Provides a smooth, standardized surface for repeatable abrasion and washability testing of coatings, inks, and surface finishes.

The Shore Hardness Gauge Test Stand is designed for Shore A, C, and D* type Durometers, ensuring precise and reproducible hardness tests on rubber or plastics.

The TQC Sheen Shore Hardness Test Block Kit provides reliable reference blocks for checking durometer accuracy. Available for Durometer A and D, these kits include multiple hardness values with certified calibration, ensuring your durometers operate within tolerance for consistent and repeatable hardness testing.

Set of 5 replacement sponge pads (138 × 50 × 30 mm) for use with tool AB5012 on compatible Scrub Abrasion and Washability Testers. Sponges can be trimmed to fit specific needs. Suitable for optional ASTM D4213 testing.

A standard test disc (Barcol range 43-48) for use with the TQC Sheen Barcol Hardness Tester, ensuring accurate Barcol hardness testing for materials

A standard test disc (Barcol range 87-89) for the TQC Sheen Barcol Hardness Tester, designed for precise hardness testing and optimal accuracy in material assessments.

Taber 551 Shear/Scratch Tester–5 rpm (230VAC / 50Hz) Motorised instrument for testing the resistance to scratching of materials. A sample plate rotates while a conical diamond point is pressed on the sample plate. The relation between the depth of the scratch and the applied (pre-set) pressure indicates the hardness.

A wide range of consistent test charts for testing physical properties of coating, lacquers and inks. Suitable for determining hiding power, opacity and spreading rate. They come in a variety of dimensions from DIN A6 up to and including DIN A4. All charts are film laminated for an excellent solvent and chemical resistance and an…

TQC Sheen Test Panels provide a consistent, reliable surface for evaluating paints and coatings. Available in a wide range of materials, sizes, and thicknesses, each panel is precision‑prepared, degreased, and ready for abrasion, corrosion, hardness, and general sample‑prep testing.

Universal test panel rack

Calibrated 300g/10.6oz weight accessory for use with the TQC Sheen Washability Tester. Ensures consistent test pressure in abrasion and washability testing of coatings, inks, and surface treatments.

A weight set from 0.5 N to 10 N for the TQC Sheen Automatic Scratch Tester & TQC Sheen Mechanized Scratch Test Tester (SH705), providing precise incremental load control for coating durability testing.

A set of weights up to 2 kg for use with the TQC Sheen Automatic Scratch Tester & TQC Sheen Mechanized Scratch Test Tester (SH705), providing controlled load increments for coating durability testing.