United's TRU-BLUE II Rockwell Hardness Tester uses the latest electronic controls, coupled with high-precision load cells to provide highly accurate penetration measurement data.
Description
Specifications
Documents
Accessories
The True Blue II Hardness Tester is used in many NADCAP approved facilities including heat treaters, fastener manufacturers, and fabricators.
Available in test heights from 10”, 14”, 18” and 20″.
Meets all NIST, ISO, CE, ASTM requirements.
15 Regular scales: A, B, C, D, E, F, G, H, K, L, M, N, P, S, V
15 Superficial scales: 15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X, 30X, 45X. 15Y, 30Y, 45Y
Display statistics: Avg, Range, Min/Max, Std deviation and Number of tests
Throat depth: 5.5 in. (standard)
Meets ASTM E-18 and ISO 6508 requirements.
Item: TB-II-H10-D5.5
Vertical Capacity: 10″
Throat Depth: 5.5″
Closed loop: control of test cycle
Application: of force measured via Load Cell
Test: 5 preset test dwell times in accordance with ASTM E-18
Warranty: 2-Year factory Warranty
Certified: CE Certified
Spec: 110 or 220VAC 50/60 Hz 1 Phase, 1 Amp
DIMENSIONS: 8″W x 20″D x 33.5″H
WEIGHT: 185 lbs. (84 Kg)
Rockwell diamond indenters: Scales A, C, N and C/N combo indenters.
SKU: Diamond Indenters
Additional accessories: 2 inch roll mini serial and parallel printers Stationary and mobile stands Foot switch to activate test cycle Mini PS/2 keyboard Flexible LED lamp
SKU: TB II Accessories
United Testing Systems offers a large selection of Rockwell, Brinell and Micro hardness test blocks. All test blocks come with a certification sheet containing all the necessary calibration information.
SKU: TB II Test Blocks
Hardness Anvils are used to support your samples when performing a Rockwell Hardness test. Various anvil's are available for a variety of different sample sizes and shapes.
SKU: True Blue II Hardness Anvils
The mobile stand places the test unit at the ideal height for operators and provides a door and a shelf with storage for anvils, indenters and other accessories.
SKU: True Blue II Mobile Floor Stand
Item: TB-II-H10-D5.5
Vertical Capacity: 10″
Throat Depth: 5.5″
Closed loop: control of test cycle
Application: of force measured via Load Cell
Test: 5 preset test dwell times in accordance with ASTM E-18
Warranty: 2-Year factory Warranty
Certified: CE Certified
Spec: 110 or 220VAC 50/60 Hz 1 Phase, 1 Amp
DIMENSIONS: 8″W x 20″D x 33.5″H
WEIGHT: 185 lbs. (84 Kg)
Additional accessories: 2 inch roll mini serial and parallel printers Stationary and mobile stands Foot switch to activate test cycle Mini PS/2 keyboard Flexible LED lamp
SKU: TB II Accessories
United Testing Systems offers a large selection of Rockwell, Brinell and Micro hardness test blocks. All test blocks come with a certification sheet containing all the necessary calibration information.
SKU: TB II Test Blocks
Hardness Anvils are used to support your samples when performing a Rockwell Hardness test. Various anvil's are available for a variety of different sample sizes and shapes.
SKU: True Blue II Hardness Anvils
The mobile stand places the test unit at the ideal height for operators and provides a door and a shelf with storage for anvils, indenters and other accessories.
SKU: True Blue II Mobile Floor Stand
Rockwell diamond indenters: Scales A, C, N and C/N combo indenters.
SKU: Diamond Indenters
Available in test heights from 10″ 14″ and 18″ and 20″
Meets all NIST, ISO, CE, ASTM requirements
5 preset load dwell times including NIST and plastics
Computer controlled application of forces via load cell (closed-loop)
Display resolution of hardness values: points, tenths and hundredths
RS-232 Serial, Parallel (Dot Matrix printer), & PS/2 keyboard connections
4×20 line VF display
Automatic cylindrical part correction
Scale to scale conversion
Parts GOOD/NO GOOD w/ audio alert
Connector for test activation by foot switch
Bi-directional testing capability; manual pre-load or via panel
Removable parts clamping device to secure parts for testing and to reduce operator influence
Factory direct certification: Depth, force, hysteresis & dwell timing vs. force
Factory indirect certification available. Requires customer indenter(s) and flat anvil (min size 1.5″). Five hardness scales at no extra charge
CE approved
2-year factory warranty
Operation manual, AC power cord (US version) and indenter install tool.
Vertical testing capacities: 10, 14, 18 & 20 inches.