Product Enquiry Cart

Product/s I am interested in

You currently have no products in your enquiry cart, please continue browsing and select more products.

Get a Quote

Continue Browsing

TME Solution: Leak or Leak Flow Test System

TME Solution Leak & Leak Flow Tester | Pressure or Vacuum Decay |

Description

Specifications

Documents

Accessories

TME Solution: Leak or Leak Flow Test System
Single or Multi-Port | Sequential or Concurrent

Pressure or Vacuum Decay | Leak or Leak/ Flow Test System
The TME Solution has proven throughout the years to be one of the most reliable long lasting custom and standard leak test instruments in the medical, pharmaceutical and automotive industries. The TME Solution, in conjunction with custom fixtures, accessories, and engineering support, provides a complete turnkey solution to your leak and flow testing needs.

The Ultimate in Flexibility:
Highly repeatable, quantitative results from clean, dry tests. The TME Solution is available in configurations up to four ports, and dual switching is available to maximize operator productivity.

Resolution:  0.0001psi (0.01 mbar)/second

Interface:  Touchscreen Display

Units of measure:  PSI, InH2), kPa, mbar

Connection:  RS232

Connectivity: Ethernet

    Filter Dryer Set

    Filter Dryer Set For Use with All TME Leak, Flow and Package Testers Protects your leak, flow or package tester from damage from water, water vapor, oil vapor or oil. Air quality provided to your instrument is critical to the long term performance of the equipment. The air supply must not contain water or oil liquid or vapor; otherwise, sensitive pneumatic components and the transducer may be damaged. The warranty on the instrument does not extend to damage caused by oil or water contamination or heavy particulate contamination. The components consist of: a. Coalescing Filter - 16 CFM, 150 psig maximum at 125F b. Desiccant Drying Filter - 5 CFM, 150 psig maximum at 125F c. Final Filter - 40 CFM, 5 um, 150 psig maximum at 125F The coalescing filter prevents oil vapors from contaminating the desiccant drying resin and decreasing their absorption capability. The desiccant drying material is silica gel with an indicating color. When the silica has turned PINK the material must be replaced or recharged. Recharging may be done according to manufacturer's instructions. The final filter is a particulate filter to prevent dust from the desiccant drying cartridge from entering the instrument. This filter can be monitored for discoloration or visible particulate. The filter element is a 5um pore size and can be washed and blown dry for reuse. Not all compressed air is acceptable instrument quality. For that reason a filtering system that combines a 5-micron filter with a drying system is advised. This system will provide both the filter and a desiccant dried air for the instrument, assuming basic plant air is controlled for moisture

    SKU: LA-05

    Radial Sealing Fixture

    Radial Sealing Fixture The RS-01 TME Radial Sealing Fixture contains a pneumatically operated clamp that provides either a sealed leak tight access to a tubular product or a sealed leak tight dead end to the product during pressure decay leak testing. Radial Sealing Fixtures can be configured to diameters from approximately 0.022 to 6.000 inches. An Application for Radial Seal Clamps in Custom Sealing Fixtures: TME specializes in custom designed fixturing to accommodate the specific needs of our customers. This customer needed to perform leak and occlusion tests on catheters with an open distal tip and proximal side ports. This Radial Sealing Fixture is a pneumatically actuated fixture comprised of pneumatic seal clamps that function together to close around the outside diameter of the catheter and seal all leak paths from the catheter distal tip and proximal side ports during pressure decay leak and backpressure occlusion testing.

    SKU: RS-01/2/3

Resolution:  0.0001psi (0.01 mbar)/second

Interface:  Touchscreen Display

Units of measure:  PSI, InH2), kPa, mbar

Connection:  RS232

Connectivity: Ethernet

    Radial Sealing Fixture

    Radial Sealing Fixture The RS-01 TME Radial Sealing Fixture contains a pneumatically operated clamp that provides either a sealed leak tight access to a tubular product or a sealed leak tight dead end to the product during pressure decay leak testing. Radial Sealing Fixtures can be configured to diameters from approximately 0.022 to 6.000 inches. An Application for Radial Seal Clamps in Custom Sealing Fixtures: TME specializes in custom designed fixturing to accommodate the specific needs of our customers. This customer needed to perform leak and occlusion tests on catheters with an open distal tip and proximal side ports. This Radial Sealing Fixture is a pneumatically actuated fixture comprised of pneumatic seal clamps that function together to close around the outside diameter of the catheter and seal all leak paths from the catheter distal tip and proximal side ports during pressure decay leak and backpressure occlusion testing.

    SKU: RS-01/2/3

    Filter Dryer Set

    Filter Dryer Set For Use with All TME Leak, Flow and Package Testers Protects your leak, flow or package tester from damage from water, water vapor, oil vapor or oil. Air quality provided to your instrument is critical to the long term performance of the equipment. The air supply must not contain water or oil liquid or vapor; otherwise, sensitive pneumatic components and the transducer may be damaged. The warranty on the instrument does not extend to damage caused by oil or water contamination or heavy particulate contamination. The components consist of: a. Coalescing Filter - 16 CFM, 150 psig maximum at 125F b. Desiccant Drying Filter - 5 CFM, 150 psig maximum at 125F c. Final Filter - 40 CFM, 5 um, 150 psig maximum at 125F The coalescing filter prevents oil vapors from contaminating the desiccant drying resin and decreasing their absorption capability. The desiccant drying material is silica gel with an indicating color. When the silica has turned PINK the material must be replaced or recharged. Recharging may be done according to manufacturer's instructions. The final filter is a particulate filter to prevent dust from the desiccant drying cartridge from entering the instrument. This filter can be monitored for discoloration or visible particulate. The filter element is a 5um pore size and can be washed and blown dry for reuse. Not all compressed air is acceptable instrument quality. For that reason a filtering system that combines a 5-micron filter with a drying system is advised. This system will provide both the filter and a desiccant dried air for the instrument, assuming basic plant air is controlled for moisture

    SKU: LA-05

Features & Benefits

A high-resolution leak or leak/flow test system

One to four channel concurrent or sequential leak and flow testing

Sensitive, repeatable, easily maintainable and reliable

Test types including burst, occlusion, vacuum, and pressure decay, crack, and differential pressure or vacuum

Touchscreen menu-driven operation allows the operator to control the test parameters, examine statistical analysis of results or download data files easily.

Touchscreen menu allows easy input and storage of up to 100 linkable programs, with data storage for up to 5000 test results.

Real-time statistical analysis and quality control charts are accessible on demand for the highest level of process control.

Units of measure accessible through the menu include PSI, InH2O, kPa, and mbar.

Two-way RS232 connection for data collection and remote parameter control;

Ethernet connectivity is available to allow data to be transmitted from the instrument to a LAN.

The TME Solution™ provides CFR Part 11 Data Protection and conforms to ASTM and ISO-11607 guidelines. Calibration is NIST traceable.