Product Enquiry Cart

Product/s I am interested in

You currently have no products in your enquiry cart, please continue browsing and select more products.

Get a Quote

Continue Browsing

SEAM360: Oil Filters

non-destructive 360 degree seam inspection for oil filters

Description

Specifications

The SEAM360 is a safe, quick, accurate, automatic and non-destructive double seam inspection system for oil filter seams of any size.

Conventional double seam testing methods that involve cutting the seam are potentially unsafe, expensive and only test a handful of points around the seam. Furthermore, due the high cost of the product, the test can’t be done often and so double seam defects can go unnoticed for hours.

The SEAM360 test takes just seconds and measures seam thickness and seam height / length at every point around the seam, so bumps, cracked chucks, droops, split seams and other issues are easily picked up and displayed. Because all readings are taken automatically and the filter is rotated by the built-in motor, there’s no operator influence on the results. The SEAM360 is supplied in a lab / off line configuration, where operators manually load filters in to the unit or in an inline / robotic configuration with in and out conveyors.

Using a SEAM360 for your oil filter seam tests improves quality, accuracy, tracebility and saves valuable resources.

So far, the system has detected:
Droops & Vees
False seams
Broken chucks
Split seams
Tooling & bearing issues
Seam gap issues
Overlap problems
Overhang
Seam bumps
Knocked-down flanges
Dead-heads & skids
and best of all … It’s non-destructive!

Contact Quality By Vision today for more information.

Resolution:  0.0005″ (0.01 mm) or better for seam thickness and seam length / height

Interface:  USB2

Optical units:  Off-line (lab), Inline (robotic)

Scan time (one filter):  about 10 seconds

Manual measurement cycle time:  about 1 minute for 4 filters

Features & Benefits

Modes of Operation

Laboratory / off-line – SEAM360 tests one filter at a time in a lab environment.

Inline, continuous – Kick out one random filter every X minutes, SEAM360 tests and alerts when there is a problem.

Inline, manual – Bring a box of filters to the conveyor, line them up and start the test – SEAM360 will produce a report and statistics graphs at the end of the measurement process.

Inline, automatic – Kick out one filter from each seamer / seaming head every X minutes and bring them in to the conveyor – SEAM360 will test all of them and send them back to the line.

Advantages to conventional seam testing methods

Tests for seaming problems all around the seam, not just at a handful of points

Detects and locates hard to find errors that can be easily missed in a seam test, such as bumps, variations around the seam, skids, broken chucks and more!

An affordable alternative to conventional (destructive) testing

Much faster and more reliable than conventional testing

So far, the system has detected:

Droops & Vees

False seams

Broken chucks

Split seams

Tooling & bearing issues

Seam gap issues

Overlap problems

Overhang

Seam bumps

Knocked-down flanges

Dead-heads & skids

and best of all … It’s non-destructive!