Back to Product Search

Slideshow Items

United Testing Screw Action Grips

United Testing screw action grips for tensile testing strip and sheet materials such as paper, foam, textiles and light metals. Available in 50 lbf and 2,250 lbf capacities.

In order to request a quote, arrange a service or make an inquiry about this product you must select modifiers above.

Description

Screw action grips secure strip and sheet materials such as paper, foam, textiles and light metals during tension tests on a universal testing machine. They work like a vise clamp: moveable inserts close to hold the sample. They also suit lap shear specimens with offset ends. Two models are available, the SG-10 (50 lbf) and the SG-10-10KN (2,250 lbf).

Model  Capacity (lbf)  Width 
SG-10 50 1″ x 1″
SG-10-10KN 2,250 2″ x 2″

Associated standards:

Plastics and composites

  • ASTM D638 – Standard Test Method for Tensile Properties of Plastics
  • ASTM D882 – Standard Test Method for Tensile Properties of Thin Plastic Sheeting
  • ASTM D1708 – Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
  • ASTM D5766 – Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5961 – Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
  • ISO 527-2 – Tensile properties of plastics
  • ISO 527-3 – Tensile testing of thin plastic films and sheets
  • ISO 527-4 – Tensile properties of isotropic and orthotropic fiber-reinforced plastic composites
  • BS EN 2561 – Tensile testing of carbon fiber reinforced plastics
  • BS EN 2597 – Tensile properties of unidirectional carbon fiber reinforced plastics

Rubber and elastomers

  • ASTM D412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension
  • ISO 37 – Tensile properties of vulcanized or thermoplastic rubber

Foam and cellular materials

  • ISO 1798 – Tensile strength and elongation at break of flexible cellular polymeric materials
  • ISO 1926 – Tensile properties of rigid cellular plastics

Textiles, yarns and geosynthetics

  • ASTM D885 – Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns
  • ASTM D4632 – Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
  • ASTM D5034 – Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
  • ASTM D5035 – Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
  • ISO 2062 – Breaking force and elongation at break of yarns
  • ISO 10319 – Wide-width tensile test of geosynthetics
  • ISO 13934 – Tensile testing of fabrics (grab method)

Metals and welds

  • ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ISO 6892 – Tensile testing of metals and metallic materials
  • IS 1608 – Tensile testing metallic materials at ambient temperature
  • ANSI/AWS B4.0 – Standard methods for mechanical testing of welds

Wood-based panels

  • ASTM D1037 – Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
  • BS EN 319 – Tensile strength of particleboard and fiberboard

Paper

  • TAPPI 220, 456 and 494 – Tensile testing of paper

Medical and biomaterials

  • ISO 11193 – Tensile testing of single-use medical gloves
  • ASTM F2150 – Tensile testing polymer hydrogels

Specifications

SKU:

Applications: Abrasion Testing, Materials Testing, Sample Testing, Strength Testing, Tear Testing, Tensile Testing

Materials: Adhesive, Aluminum, Cardboard, Composites, Elastomers, Film, Metal, Non-wovens, Plastics and Polymer, Rubber, Steel, Textile, Wood

SG-10:

Capacity: 50 lbf

Faces: 1″H x 1″W, serrated (included)

Size: 3/8″-24 female threads

Supplied as: set of 2

Adapters: not included

SG-10-10KN:

Capacity: 2,250 lbf

Standard insert size: 2″ x 2″, stainless steel

Other insert size: 2″ x 1″

Insert material: serrated steel or rubber faced

Features & Benefits

  • SG-10-10KN: anodized steel construction for long life and high performance
  • SG-10-10KN: dual action T-handle for aligning offset samples such as lap shear specimens
  • SG-10-10KN: inserts available in different sizes and materials (serrated steel or rubber faced)
  • SG-10: serrated faces included, 3/8″-24 female threads, supplied as a set of 2, adapters not included
  • Made of high quality anodized steel to ensure long life and high performance
  • Various sized inserts are available in different dimensions and material type
  • Dual action T-Handle allows for proper alignment of offset samples such as those used in lap shear testing applications

Ready to Take the Next Step?

Interested in this product?

Select variables above

Do you own this product?

Select variables above

Can't find what you are looking for?