ENR-4000 Digital Enamel Rater
Enamel Rater for Metal Exposure
Enamel Rater for Metal Exposure
Description
Specifications
The new ENR-4000 Digital Enamel Rater tests the coverage of the enamel coating inside food and beverage cans and ends.
The ENR-4000 determines the lacquer permeability on 3-piece cans, 2-piece cans, aerosol cans, can ends, side seams, bottle caps and even tubes.
The current flow is measured in mA to detect any areas of metal exposure. The manual digital enamel rater is quickly and easily configured for: test voltage (4v, 6.3v or 10v); measurement range (0-250mA); test time (from 1 to 99 seconds); and test polarity.
Fixtures available for 3-Piece Cans, 2-Piece Cans, Aerosol Cans, Can Ends, Side Stripes, Bottle Caps, Flat Sheets and Tubes
Range: Adjustable between from 2.0 to 10.0V in steps of 100mV. (Precision 1%) up to 250mA (Automatic range switching)
Power: 120 / 230 VAC 50-60Hz
Measurement Units: mA
Output Interface: RS232
Languages: English, German
Dimensions: 230mm x 205mm x 80mm (9 in x 8 in x 3 in)
Resolution: (0-250mA) 10±A
Range: Adjustable between from 2.0 to 10.0V in steps of 100mV. (Precision 1%) up to 250mA (Automatic range switching)
Power: 120 / 230 VAC 50-60Hz
Measurement Units: mA
Output Interface: RS232
Languages: English, German
Dimensions: 230mm x 205mm x 80mm (9 in x 8 in x 3 in)
Resolution: (0-250mA) 10±A
100 Ohm calibrated test resistor available for calibration
Fill level control
Reverse Polarity to identify location of metal exposure
CE Certified
Full-sized color touchscreen
Current Measurement graph option
Two connector ports for test fixtures
Two separate test channels