TQC Sheen Bresle Kit – Chloride Test Kit

An absolute clean surface is a must for successful coating work. Salt trapped under a coating layer will attract moisture due to its hygroscopic nature, causing corrosion and pitting.

Developed by TQC Sheen, our paint testing specialist brand, our Bresle Kit and Chloride Test Kit is perfect for companies that work within marine coatings, protective coatings and pipeline coatings. It will help you to detect the presence of soluble salts expressed in milligrams per square meter.

Blasted surfaces may look perfect, but salts – one of the most harmful contaminants – cannot be seen by the naked eye. These contaminants can be caused by a variety of different causes from air pollution and a maritime environment through to contaminated blast media. So assessing the soluble salts before applying a coating is essential.

When you invest in our Bresle Kit and chloride test kit you’ll get all of the equipment you need for testing soluble salts on blast-cleaned surfaces. Inside the Bresle Kit you’ll find a conductivity gauge that will accurately test the chloride, sulfate and nitrate content of your solution.

ISO compliant Bresle kit testing

Our Bresle Kit and Chloride Test Kit includes all the necessary equipment to execute a Bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating.

Our Bresle Kit and Chloride Test Kit complies with  ISO 8502-6 and ISO 8502-9 standards.

Blast-media Bresle kit testing

The Bresle Kit and Chloride Test Kit also enables you to determine the contamination of the blast-media in use. This is important to prevent the dissolved salts in the recycled abrasive media or water re-contaminating the surface being cleaned.

Related Bresle kit products

Across the IP portfolio we make a wide range of Bresle kit related products. For example, we make a range of TQC Sheen bresle patches and the TQC Sheen pre-treatment test Kit (PTK)

You can learn more about our Bresle Kit and Chloride Test Kit by viewing our video:

Expert knowledge

At Industrial Physics, we like to share a little knowledge along the way. So why not check our recent blog on Bresle kit testing?

Scope of supply

The Bresle Kit consists of:

• Case
• Digital Conductivity meter
• 25 Bresle patches
• Distilled water
• Calibration and Cleansing Solutions
• Cups and syringes