The 80-91 Release and Adhesion testing system measures the peeling strength of pressure sensitive adhesives and release strength of labels. The unit meets a widevariety of international standards from ASTM, FINAT, TLMI and other standards.
SKU:20311
80-91
Brand:
Applications:
Industries:
Standards:
Description
Specifications
Documents
The Lab Master® Release and Adhesion testing system measures the peeling strength of pressure sensitive adhesives and release strength of labels. The unit meets a variety of international standards such as ASTM, FINAT, TLMI and other standards. Methods are user-defined, saved and selected through a PC- based touch screen display operating under Windows® based application software. The software offers the ability to create user-defined test set-ups, individual test speed selection, user-definable default areas for analysis, and enhanced calibration. Test data visually represents the characteristics of the peel.
Model: 80-91-00-0001
Load cell ranges: 0-500 g (1.1 lb) – 0-4,540 g (0-10 lb) – 0-11,339 g (0-25 lb)
Tests samples: up to 5 cm (2 in.) wide with maximum peeling length of 30.48 cm (12 in.)
Variable speeds: from 5-4064 cm/min (2-1600 in./min.)
Weight: 40 kg (88 lb)
Dimensions (WxDxH): 57.5 in. x 8 in. x 21.75 in. (1461 mm x 203 mm x 553 mm)
Electrical auto-ranging power supply: 100-120 V nominal ±10%, 50/60 Hz, 220-240 V nominal -5% +10%, 50-60 Hz
Model: 80-91-00-0001
Load cell ranges: 0-500 g (1.1 lb) – 0-4,540 g (0-10 lb) – 0-11,339 g (0-25 lb)
Tests samples: up to 5 cm (2 in.) wide with maximum peeling length of 30.48 cm (12 in.)
Variable speeds: from 5-4064 cm/min (2-1600 in./min.)
Weight: 40 kg (88 lb)
Dimensions (WxDxH): 57.5 in. x 8 in. x 21.75 in. (1461 mm x 203 mm x 553 mm)
Electrical auto-ranging power supply: 100-120 V nominal ±10%, 50/60 Hz, 220-240 V nominal -5% +10%, 50-60 Hz
Precision direct drive system (no chain). By use of the servo drive system and lead screw there is no lag time or ramp up speed at the start of the test to maximum speed.
Simple calibration set-up allows hanging calibration weights directly from the load cell- no pulleys are necessary.
Low range load cell of 1.10 lb. (500 gram) and low noise signal processing allows precision low force release testing below 20 grams force.
PC-based control with convenient touch-screen operation.
Solid instrument base design eliminates internal drive vibration providing increased sensitivity at low force measurements.
Ability to save and recall peel data for advanced analysis.
Twist lock angle system with degree markers, allowing test angles of 90°,135°, and 180°.
