When you need to measure the tacking strength between vulcanized and unvulcanized rubber, look no further than the PICMA Tack Tester.
Description
Specifications
Brought to you by Testing Machines Inc, our physical property specialist testing brand, this talented tack tester also inspects the tacking strength of foams, plastics and polymers and textiles.
The PICMA P3 is a bench top tack tester that’s relied upon across the flexible packaging, inks and coatings and plastic and polymer sectors.
If you’re using rubber and reinforcement materials to create molding tires and belts, they’re often bonded in multiple layers and vulcanized. It’s essential to check each component’s tackiness with a tack tester before the forming process is completed.
We make a wide range of tack tester devices and related accessories. For example, check out the Heat Sealer and Hot Tack Base 75-50 or the Tackiness Checker (Model HTC-1) 80-10.
We like to share our expertise at Industrial Physics. Why not check out our blogs on tack test adhesive insights and what is tire testing?
Model: P-3
Measurement method: load cell
Tack test measuring load range: 0.0 to 30.0N
Sticking load: 2 to 5N (Standard) / Max. 20N (Optional)
Number of times to perform tack test: 1, 3, 5 (Selectable)
Sticking time: 0.0 to 99.9 sec.
Specimen mounting wheel down speed: 60mm/min., 1000mm/min. (Selectable)
Specimen mounting wheel separating speed: wide speed
Low speed: 5, 7.5, 10, 15, 20, 25, 30, 50mm/min.
High speed: 100, 500, 700, 1000, 1250, 1500, 2000, 3000mm/min (Select one)
Interface: R-232C
Dimensions: W300 × D330 × H510 mm
Mass: (Approx.) 18kg
Power supply: single-phase, AC100 to 240V, 50/60Hz, 0.5kVA
Model: P-3
Measurement method: load cell
Tack test measuring load range: 0.0 to 30.0N
Sticking load: 2 to 5N (Standard) / Max. 20N (Optional)
Number of times to perform tack test: 1, 3, 5 (Selectable)
Sticking time: 0.0 to 99.9 sec.
Specimen mounting wheel down speed: 60mm/min., 1000mm/min. (Selectable)
Specimen mounting wheel separating speed: wide speed
Low speed: 5, 7.5, 10, 15, 20, 25, 30, 50mm/min.
High speed: 100, 500, 700, 1000, 1250, 1500, 2000, 3000mm/min (Select one)
Interface: R-232C
Dimensions: W300 × D330 × H510 mm
Mass: (Approx.) 18kg
Power supply: single-phase, AC100 to 240V, 50/60Hz, 0.5kVA
A convenient bench top tack tester
Multi application tack tester