The 21-10 Automatic Densimeter DSG-1 is a high precision instrument that offers accurate measurement of the specific gravity of liquids or the rate of change of volume for rubber and other materials.
Description
Specifications
Documents
The 21-10 Automated Densimeter DSG-1 is a high precision digital instrument that offers accurate, simple operation in almost any laboratory environment. An electronic balance determines specific gravity of rubber, plastics (especially like polyethylene), ceramic, and various other materials with the single push of a button.
Analysis:
The Automated Densimeter DSG-1 21-10 provides Specific Gravity and Density measurements, weighed in the Automated Unit with highly accurate and repeatable results.
Simple to operate:
Specific gravity of the sample can be directly read on the indicator screen simply and easily.
Max. capacity: 100g
Minimum readout: 0.0001g (0.1mg)
Specific gravity (density) minimum display: 0.000001 [0.000001g/cm3] (Possible to change the unit as kg/m3)
Volume minimum display: 0.0001 cm3 (possible to change the unit as m3)
Operation panel: 4.7 inch LCD touch panel
Breaker lifting mechanism: Motorized direct-drive actuator
Stroke: 100mm
Variable speed: 10, 20, 30mm/sec
Variable stop position (lower side): 0, 10, 20mm
Variable stop position (upper side): 100, 90, 80mm
Measurement item (standard): Solid density
Data saving capacity: 100 data per lot x 200 lot (however up to 1000 data)
Interface: RS-232 x 1
Power supply: Single-phase, AC100V~240V, 50/60Hz, 0.1kVA
Dimensions (WxDxH): 290 x 443 x 865mm
Weight (approx.): 30kg
Power supply: Single-phase, AC100V~240V, 50/60Hz, 0.1kVA
Max. capacity: 100g
Minimum readout: 0.0001g (0.1mg)
Specific gravity (density) minimum display: 0.000001 [0.000001g/cm3] (Possible to change the unit as kg/m3)
Volume minimum display: 0.0001 cm3 (possible to change the unit as m3)
Operation panel: 4.7 inch LCD touch panel
Breaker lifting mechanism: Motorized direct-drive actuator
Stroke: 100mm
Variable speed: 10, 20, 30mm/sec
Variable stop position (lower side): 0, 10, 20mm
Variable stop position (upper side): 100, 90, 80mm
Measurement item (standard): Solid density
Data saving capacity: 100 data per lot x 200 lot (however up to 1000 data)
Interface: RS-232 x 1
Power supply: Single-phase, AC100V~240V, 50/60Hz, 0.1kVA
Dimensions (WxDxH): 290 x 443 x 865mm
Weight (approx.): 30kg
Power supply: Single-phase, AC100V~240V, 50/60Hz, 0.1kVA
Electronic Control and Digital Outputs
Measures specific gravity of a wide range of substances
Only about 20 seconds required to measure one sample
Simple operation – mount sample, push start button, dismount sample
Distilled water is used as the standard liquid, but other liquids can be used depending on test requirements
Many attachments available for versatility in testing