Knowledge Base

Articles

Understanding Air Permeability (Porosity) in Paper and Board

Air permeability, also called porosity, is the measure of how readily air passes through a sheet of paper or board. It is used across paper and board production to monitor and control the internal structure of the sheet as it is made.

Porosity affects printability, coating holdout, barrier performance, and converting behavior. A sheet with inconsistent porosity absorbs ink, coatings, or adhesives unevenly, which shows up downstream as print defects, uneven gloss, or coating failures.

Porosity is measured in two main ways:

  • Inline (on the machine): a sensor continuously measures air permeability across the running web, feeding data back to process control so operators can adjust refining, retention, and other variables in real time.
  • Offline (in the lab): a sample is cut and tested on a benchtop instrument, typically using the Gurley method, standardized under TAPPI T460 and ISO 5636-5.

The Gurley method measures the time, in seconds, for a fixed volume of air to pass through a fixed area of sample under a set pressure. This result is reported in Gurley seconds. Lower Gurley seconds indicate a more porous, open sheet; higher Gurley seconds indicate a denser, less permeable sheet.

Inline and offline porosity measurement serve different purposes. Inline monitoring supports process stability, catching drift before it becomes a quality problem. Offline lab testing supports quality control and certification, confirming the finished product meets specification. Used together, they give mills both real-time process control and a defensible quality record.

Was this useful?

FAQs

  • Inline testing measures air permeability continuously on the running paper machine, supporting real-time process adjustments. Offline testing, typically the Gurley method under TAPPI T460 or ISO 5636-5, measures a cut sample in the lab to confirm the finished sheet meets specification.

  • Gurley seconds record the time taken for a fixed volume of air to pass through a fixed area of sample under a set pressure. A higher number means a denser, less permeable sheet; a lower number means a more open, porous sheet.

  • Porosity controls how ink, coatings, and sizing agents interact with the sheet surface. Uneven porosity leads to uneven ink absorption, coating weight, or gloss, which shows up as visible print or coating defects.

  • No. The Gurley method is suitable for air permeance roughly between 0.1 and 100 micrometers per pascal-second. It is not suitable for rough-surfaced materials that cannot be clamped tightly enough to prevent air leakage around the sample edge.

  • Filters on inline air permeability sensors typically need replacing every four to eight weeks, depending on the operating environment, to maintain measurement accuracy.

Related Articles